Swim & Fun Classic Oval Steel Pool Bedienungsanleitung Seite 136

Check also if the pool wall is oval and measure the diameter across a few spots to make sure the
differences of each diameter measured are within 2 cm.
If the levels are not to specifications then the area will have to be leveled again.
Caution!
Try not to damage any of the components when dissembling the pool wall to correct the
level of the ground.
Once the measurements and levels are correct and all nuts are tightened, then cover the exposed
screw heads with the Self Adhesive Tape (Diagram 26 and 27).
136
MV-2908-2909-2920-2021-11-2017 . © All rights reserved Swim & Fun Scandinavia ApS
UK