Working With The Ridger; Adjusting The Swivel Range - Stihl AHK 800 Gebrauchsanleitung

English
► Detach retaining pin (4) and remove pin (5).
The ridger (2) can be removed.
► Insert blade spur (6) into adapter (7) from below so the
bores align.
► Insert pin (5).
► Push retaining pin (4) through the bore in pin (5).
The blade spur is secured.
22

8 Working with the Ridger

8.1

Adjusting the Swivel Range

The swivel range of the ridger can be adjusted.
► Stop the engine.
► Place the tiller on a level surface.
► Loosen lock nuts (1).
► Screw in screws (2) by turning clockwise.
► Tighten lock nuts (1) firmly.
The swivel range is decreased.
► Loosen lock nuts (1).
► Unscrew screws (2) by turning anti-clockwise.
► Tighten lock nuts (1) firmly.
The swivel range is increased.
8 Working with the Ridger
0478-906-9911-A