Description Of The Artromot®-E2/-E2 Compact - DJO ARTROMOT-E2 Gebrauchsanleitung

2. Description of the ARTROMOT®-E2/-E2 compact
The motorized CPM device supports the
following movements of the elbow joint:
Extension/flexion
Pronation/supination
It can be reconfigured for use on either side.
Note!
To unambiguously represent the current
position of the CPM device, pronation
and extension values below 0° are
marked with the symbol "-" both on the
display and in this document.
These are some of the outstanding
ARTROMOT®-E2/-E2 compact features:
− anatomically correct adjustment
− physiological movements
− maximum possible ranges of motion
− programming unit for precise adjust-
ment of patient-specific therapy values
− chip card for storage of the programmed
therapy parameters
− easy transport
5° - 0° - 140°
90° - 0° - 90°
47
Biocompatibility
Those parts of the ARTROMOT®-E2/
-E2 compact that come into contact with
the patient when the device is used as
intended, are designed to fulfil the
bio compatibility requirements of the
applicable standards.
Essential Performance Features
– The programmed angles are accurately
maintained with a tolerance of +/- 2°.
– The programmed speeds are accurately
maintained with a tolerance of +/- 5%.
– The selected mode and mechanical set-
tings do not change during operation.
Frequent functions:
a) Unpacking (device and accessories)
b) Inserting the motion element and
locking it at the system rack
c) Mounting the armrest
d) Device connections (mains power
connection, connecting the control
pendant and the motion element)
e) Mechanical adjustments of the motion
element on the rotational axes
f) Programming the control pendant
(range of motion, speed, functions)
g) Storage