Replacing The Oven Burner Nozzle - Angelo Po 190TP0 Bedien- Und Installationshandbuch

REPLACING THE TOP BURNER NOZZLE (Ø110 - 7 KW)
To carry out this operation,
proceed as follows.
1 - Turn off the gas supply
tap.
2 - Remove the grid (A).
3 - Extract the burner (B).
4 - Unscrew the nozzle (C)
and replace it with the
one suitable for the
type of gas in use (see
table at back of manu-
al).
5 - Replace the burner and
the grid.
REPLACING THE TOP BURNER NOZZLE (Ø130 - 10 KW)
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob (A).
3 - Undo the screws (C) and remove the control
panel (B).
4 - Unscrew the nozzle (D) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
5 - Replace the control panel (B) and the knobs (A)
on completion of the operation.

REPLACING THE OVEN BURNER NOZZLE

To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Undo the screws (B) and remove the control
panel (A).
3 - Unscrew the nozzle (C) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
4 - Replace the control panel (A) on completion of
the operation.
B
A
A
C
B
A
- 27 -
IDM-39614802000.tif
D
C
8
IDM-39614802100.tif
B
C
IDM-39614602700.tif
8
C
IT
GB
DE
FR
ES
English