Select Input Source; Reception Via Dvb-C (Cable Television) - Megasat Royal Line II Smart Bedienungsanleitung

5. Initial installation
After completion of the initial installation, the device automatically switches to DVB-T operation.
If you want to use this mode, you can start a scan (see 5.4). If you want to use the satellite mode,
please press the „SOURCE" button and select DVB-S (see 5.3).

5.1 Select input source

To switch between the respective reception sources, press the
SOURCE button on the remote control.
• ATV (reception of analog TV channels)
• DVB-C (reception via cable television)
• DVB-S (reception via satellite)
• DVB-T (reception via terrestrial antenna)
• AV (reception via external devices, e.g. DVD player)
• HDMI (reception via external devices, e.g. game console)
• VGA (reception via external devices, e.g. PC)
Select the desired input source and confirm with the OK but-
ton on the remote control.
Note:
The television is designed for receiving satellite television by
default. An Astra channel list is already programmed. If you
want to use cable TV or receive programs via a DVB-T anten-
na, you have to search for them in advance.

5.2 Reception via DVB-C (cable television)

Change to „DVB-C" with the SOURCE button
and confirm with OK.
Note:
Make sure that the coaxial cable is properly
connected to the TV.
1. Country
Select the country you are located in
(e.g. Germany)
2. Digital auto search
Select „Digital Auto Search" to start an automatic search. On the next page, select whether you
want to start a „fast search" or a „complete search".
3. Digital manual Search
Select „Manual Search" to search for programs manually. Enter the channel number, frequency,
modulation and symbol rate. Then select „Start Scan" to start the search.
10 ENGLISH
Eingabequelle
ATV
DVB-C
DVB-S
DVB-T
AV
HDMI
VGA