Stand Mounting - Megasat Royal Line II Smart Bedienungsanleitung

3. Stand mounting

1. you need the following parts for the assembly
Note:
Before mounting the stand, please check that all parts are complete and that there is no visible
damage. If any part is missing or damaged, please contact your dealer.
2. To mount the stand
Place the TV on a flat, soft surface (e.g. blanket, foam, ...) to avoid damage to the TV or display.
Attach the stand to the TV as
shown.
04
Television
Note:
1. Make sure that the stand is pointing in the right di-
rection.
2. If the stand is not attached correctly, the TV may be-
come unstable and may tilt.
ENGLISH
4x screws
stand
back (shorter)
front (longer)