Dispensing Ice Cubes; Locking/Unlocking The Ice Maker - hanseatic HSBS17990WETA3I Gebrauchsanleitung

Dispensing ice cubes

When dispensing ice cubes, use a vessel
with an opening of at least 7 cm to ensure
they drop properly into the vessel.
When you switch the appliance set-
tings from crushed ice dispensing to
"Dispensing ice cubes", residual
crushed ice will be initially dispensed
from the ice outlet.
(28) (26)
1. Press the DISPENSER button (26) re-
peatedly until the symbol (28) lights up.
2. Hold the vessel as closely as possible to
the opening for the ice (36), in order to
avoid ice cubes from falling out around
the sides of the vessel.
3. Push the vessel against the dispenser
guide (35). Ice cubes will begin to pour
into the vessel.
4. Remove the vessel from the dispenser
guide to stop the flow of ice cubes.
All manuals and user guides at all-guides.com
Removing cold water and ice
(36)
(35)
Locking/unlocking the ice
maker
Locking
If you plan not to use the ice dispensing func-
tions for an extended period of time, you can
lock the ice maker:
(31) (29)
1. If required, press the LOCK/UNLOCK but-
ton (23) to unlock the control panel.
2. Press button ICE OFF button (31). The
symbol (29) will light up on the display.
3. Lock the ice dispenser (2) using the lock-
ing box (34) to conserve energy.
Unlocking
1. Remove the locking box (34) and close
the door to the freezer compartment.
2. Unlock the control panel by pressing the
LOCK/UNLOCK button (23).
3. Press the ICE OFF button (31).
Page EN-27
(34)
(2)