Screen Menu; Setting "Zoom; Automatic Picture Quality Adjustment Function (For Pc 2 Only); Making Further Automatic Adjustments To The Picture Quality For The Current Input Signal (Auto Adjust) (For Pc 2 Only) - Sony MFM-HT205 Bedienungsanleitung

Screen menu

You can adjust the following items using the "Screen" menu.
• Zoom
• Auto Adjust
• Phase
• Pitch
• H Center
• V Center
• Resolution
x Setting "Zoom"
This feature lets you watch 4:3 normal broadcasts or other picture
sizes such as Letter box movies in several "Zoom" modes.
A "Zoom" value is set for each available input.
Tip
You can also switch the "Zoom" setting by pressing the
remote control repeatedly.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Screen" menu appears on the screen.
3 Press the M/m buttons to select "Zoom" and press
the OK button.
The "Zoom" menu appears on the screen.
Screen
Zoom :
Auto Adjust
Phase :
Pitch :
H Center :
V Center :
Resolution
Select
4 Press the M/m buttons to select the desired mode
and press the OK button.
• Normal: Original aspect ratio.
• Full:
A picture is enlarged to fill the 16:10 screen.
Useful for viewing Squeeze signal.
• 14:9: The original 14:9 screen can be adjusted to
the size between 4:3 and 16:9.
• Wide Zoom: A picture is enlarged horizontally (non-
linear) to fill the 16:10 screen, keeping the
original image as much as possible.
• Zoom:
A picture is enlarged horizontally and
vertically to an equal aspect ratio that fills a
16:10 screen. Useful for viewing Letter Box
signal.
Screen HD15: PC 2
Zoom : Full
Auto Adjust
Phase : 30
Pitch : 0
H Center : 50
V Center : 50
Resolution
1680 × 1050/60 Hz
Select Set OK Exit MENU
button on the
(Screen) and
: TV
Normal
Full
14:9
Wide Zoom
Zoom
Set Exit
OK MENU
Notes
• If the input from either PC 1 or PC 2 is selected, "14:9," "Zoom,"
and "Wide Zoom" are unavailable.
• If the input from COMPONENT is selected and the video signal
being input is 1080i format, "Wide Zoom" is unavailable.
• For "Normal" mode of PC 1 or PC 2, the input signal is displayed
on the screen at its actual aspect ratio and black bars may appear at
the top and bottom of the screen depending on the input signal.
x Automatic picture quality adjustment
function (for PC 2 only)
When the display receives an input signal, it automatically
adjusts the picture's position and sharpness (phase/pitch), and
ensures that a clear picture appears on the screen (page 32).
If the automatic picture quality adjustment function of this
display seems to not completely adjust the picture
You can make further automatic adjustment of the picture quality for the
current input signal (See "Auto Adjust" below).
If you still need to make further adjustments to the picture
quality
You can manually adjust the picture's sharpness (phase/pitch) and
position (horizontal/vertical position).
These adjustments are stored in memory and automatically
recalled when the display receives a previously input and
registered input signal.
x Making further automatic adjustments to
the picture quality for the current input
signal (Auto Adjust) (for PC 2 only)
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Screen" menu appears on the screen.
3 Press the M/m buttons to select "Auto Adjust" and
press the OK button.
Make the appropriate adjustments of the screen's phase, pitch
and horizontal/vertical position for the current input signal
and store them.
4 Press the M/m buttons to select the desired mode
and press the OK button.
• OK: To start adjusting.
• Cancel:
To cancel adjustments.
25
GB
(Screen) and