Watching The Tv; Setting The Tv Channels; Changing The Tv Channel; Arranging The Order Of The Tv Channels - Sony MFM-HT205 Bedienungsanleitung

Watching the TV

Setting the TV channels

To watch TV programs, you need to set up your channels.
Perform the following procedure before you watch TV programs
for the first time.
For details on the use of the menu and buttons, see "Navigating
the menu" on page 18.
Message of "Please Start Auto Tuning" appears until you select
"Auto Tuning."
1 Press the MENU button.
2 Press the M/m buttons to select
press the OK button.
The "Set Up" menu appears on the screen.
3 Press the M/m buttons to select "Auto Tuning" and
press the OK button.
The "Auto Tuning" menu appears on the screen.
4 Press the M/m buttons to select "OK" and press the
OK button.
The display starts scanning and preparing channels
automatically.
Channel number and on-screen message appear.
5 Press the MENU button to exit the menu screen after
"Auto Tuning" is completed.
Note
This procedure may take some minutes. Do not press any buttons during
the process. Otherwise, "Auto Tuning" will not be completed properly.

Changing the TV channel

Press the 0-9 buttons to input a channel number.
The channel changes after 3 seconds. Press the ENT (enter) button
to select immediately.
Use the PROG +/– buttons to scan through the channels.
(Set Up) and
Tips
• When you press and hold the PROG + or – button, the channel number
will change rapidly.
• When you switch the TV channel while listening or operate your PC,
video or decoding device, switch the input to TV, then press PROG
+/– or 0-9 buttons. If you press PROG +/– or 0-9 buttons, the input
cannot be automatically switched to TV.
Arranging the order of the TV
channels
You can arrange the order of the TV channel to suit your
preference.
1 Press the MENU button.
2 Press the M/m buttons to select
press the OK button.
The "Set Up" menu appears on the screen.
3 Press the M/m buttons to select "Program Sorting"
and press the OK button.
The "Program Sorting" menu appears on the screen.
4 Press the M/m buttons to select the program
number with the channel you want to arrange and
press the OK button.
5 Press the M/m buttons to select the new program
number position for your selected channel and
press the OK button.
The selected channel now moves to its new program position
and the other channels move accordingly.
6 Repeat steps 4 and 5 if you want to arrange the
order of the other channels.
7 Press the MENU button to exit the menu screen.
15
PROG
or
(Set Up) and
GB