Cleaning And Care - Klarstein 100355579 Bedienungsanleitung

EN
20

CLEANING AND CARE

• Clean the inner liner, ice collecting tray, water box, ice shovel and evaporator
frequently. When cleaning, unplug the unit and remove the ice cubes. Use a diluted
solution of water and vinegar to clean the inside and the outside surface of the Ice
maker. Do not spray Ice maker with chemicals or diluted agents such as acids,
gasoline or oil. Rinse thoroughly before starting.
• Keep ventilation openings in the appliance enclosure, or in the built-in structure,
clear of obstruction. Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the manufacturer.
• To ensure the cleanliness of the ice cubes, water in the water reservoir is suggested
to be replaced every 24 hours.
• If the compressor stops for any reason such as water shortage, too much Ice, power
off, etc. Do not start the system right away, wait 3 minutes, and then re-start the Ice
maker.
• Always use fresh water before starting ice production either at initial installation or
after a long shut-off period.
• This unit is for home use only, not for outdoor use, if it is necessary for use outside,
please make sure the view window is closed.