Operating Procedures & Maintenance; Unpacking Your Ice Maker; Connecting Your Ice Maker; Cleaning And Maintaining Your Ice Maker - Klarstein 10014353 Bedienungsanleitung

11. Moving shaft for the Ice-cube
12. Transparent window for checking
13. Water fi lling funnel 13. Water fi lling funnel
Operating Procedures & Maintenance

UNPACKING YOUR ICE MAKER

1. Remove the exterior and interior packaging. Check that accessory is included fi rst. If any parts
2. Remove all the tapes on the unit. Open the transparent window, take out the water fi lling funnel
and the plastic soft tube(if supplied).
3. Clean the interior (such as water reservoir, moving shaft for Ice-cube etc.) with lukewarm water
and a soft cloth.
4. Find a location for your ice maker that is protected from direct sunlight and other sources of heat
(i.e.: stove, furnace, radiator). Place the ice maker on a level surface. Maker sure that there is at
least 15 centimeters of space between the back and sides of your ice maker and the wall.
5. Allow one hour for the refrigerant fl uid to settle before plugging your ice maker in.
6. The appliance must be positioned so that the plug is accessible.

CONNECTING YOUR ICE MAKER

DANGER
*Improper use of the grounded plug can result in the risk of electrical shock.
If the power cord is damaged please call our customer service.
1. This unit should be properly grounded for your safety. The power cord of this appliance is equipped
with a grounding plug which mates with standard grounding wall outlets to minimize the possibility
of electric shock.
2. Plug your appliance into an exclusive, properly installed, grounding wall outlet. Do not under any
circumstances, damage the grounding means of the plug. Any questions concerning power and/
or grounding should be directed toward a certifi ed electrician.
3. This appliance requires a standard 220-240Volt, 50Hz electrical outlet with good grounding
means.

CLEANING AND MAINTAINING YOUR ICE MAKER

Before using your ice maker, it is strongly recommended to clean it thoroughly.
Unplug the unit before cleaning or making any maintenance.
9