Control Functions; Stand-Alone Mode; Pause Mode - Luxura V10 Anleitung

Control functions

The appliance will switch on automatically if there is no remote start on the external timer or coin-op. Your dealer can set the remote start.
Note:
Tanning time will continue to elapse when the appliance is in pause mode.
If the sunbed is switched back on within 4 minutes after pressing <5>, the face tanner (only SLi) will not switch on. The face
tanner will restart automatically after a mandatory 4-minute cooling off period.
12
1: ENG L
Coin-op mode + remote start
Press <2> 1x to start the appliance.
Stand alone mode
Press <2> 1x.
The display shows the maximum tanning time (start time). Use the <3> and <4> keys to change the tanning time.
Press <2> 1x to confirm the chosen time. The appliance will switch on and the tanning time will start.

Pause mode

Press <5> 1x during a tanning session to put the appliance into pause mode. The lamps will switch off. The body
cooling will continue operating (maximum 4 minutes). Xsens (optional) and Qsens (optional) will pause. The lift
(optional) will lower.
The display will continue to show the tanning time left and the message "PRESS START TO RESUME" will scroll across
the bottom.
While in pause mode press <2> 1x to switch the sunbed on again or press <5> 1x to switch the sunbed off. This will
stop the tanning session and the sunbed wil start the mandatory 3-minute cooling off period.
1: ENG R