Control Without The Use Of An External Timer Or Coins - Luxura X3 Anleitung

Control without the use of an external timer or coins:

20
Note
If the sun bed is restarted within 4 minutes after stop has been pressed, it is possible that the face tanners will not switch on.
These need to cool down for at least 4 minutes, after which they will switch on automatically.
The tanning time will count down.
Other control functions:
Note
If the face tanners are restarted within 4 minutes after turn off, it is possible that the face tanners will not switch on. These need
to cool down for at least 4 minutes, after which they will switch on automatically.
12
1: ENG L 1: ENG L
The tanning time can be decreased by pressing the "start" button once.
The maximum tanning time will be indicated by the flashing numbers on the display.
Use the "decrease" "increase body cooling" buttons to decrease and increase the tanning time.
The sun bed can be started by pressing the "start" button.
The equipment will pause when the "stop" button is pressed once. The lights will go out and the fan will continue for
another 3 minutes. The tanning time will keep counting down. The tanning session can be resumed at any time by
pressing the "start" button again.
When you press the "stop" button for the second time, the sun bed will enter the compulsory cooling stage. The tanning
session has been completed.
The "increase body cooling" button increases the body cooling.
The "decrease body cooling" button decreases the body cooling.
The "face tanner" button turns the face tanner(s) or soft lamps on and off.
1: ENG 1: E