Installation And Setup - Bresser 7002534 Bedienungsanleitung

INSTALLATION AND SETUP

INSTALL WIRELESS 4-IN-1 WEATHER SENSOR
Your Wireless 4-in-1 sensor measures UV, light intensity, temperature and humidity for you It's assembled
and calibrated for your easy installation
1 Turn the top case anti-clockwise to open
2 Remove the battery door
3 Insert 3x AA size batteries into the battery
compartment, then close the battery door
NOTE
Make sure you insert the batteries in right way
according to the polarity information marked on
the battery compartment Once installed, the LED
indicator flashes and start transmit the signals.
4 Twist the Top case clockwise
5 Insert the top side of the pole to the botton of the
Mounting clamps
6 Place the nut in the hexagon hole of the clamps,
then insert the screw in other side and then
tighten it by the screw driver
NOTE:
Ensure the pole indicator align the clamps
screw hole
7 Mount the clamps to the 4-in-1 sensor bottom
case with the big screws and nuts
All manuals and user guides at all-guides.com
Step
1
Step
2
Step
4
Step 5
Step 7
7
Step
3
Step 6