Installation And Setup; Install Wireless 7-In-1 Sensor; Install Batteries - Bresser 7802541 Bedienungsanleitung

SMART VENTILATING FAN
A ventilating fan is installed inside the radiation shields to reduce the impact of sun
heat effect. The fan is driven by solar panel and will automatically start spinning under 2
conditions:
1. When the sun is shining on the solar panel, and 2. Average windspeed is below 5m/s for 1
minute.

INSTALLATION AND SETUP

Your console can pair up with one wireless 7-in-1 outdoor sensor and up to 7 other wireless
sensors like Thermo/Hygro (ST2001H), Pool/Spa (SP60010) or Soil sensor (SM60020) (sold
separately).

INSTALL WIRELESS 7-IN-1 SENSOR

Your wireless 7-IN-1 sensor measures wind-speed, wind-direction, rainfall, UV, light intensity,
temperature and humidity for you. It's assembled and calibrated for your easy installation.

INSTALL BATTERIES

Unscrew the battery door at bottom of unit and insert
the batteries according to the +/- polarity indicated.
Screw the battery door compartment on tightly.
NOTE:
The red LED will begin flashing every 12 seconds.
Ventilating fan
9
GB
Screw
location
3 x AA
batteries