between
daytime
time
operation
/
(only with advanced room control unit)
50 C
• If a room will not be in use for a shorter or a longer period of
time, press the (F) button to switch to night time operating
mode. The set daytime room temperature can be lowered to
night time temperature to save heating energy.
• When the room is in use again, press the (F) button again to
return to initial settings.
(F) Button is only active in the automatic operating
mode!
• Press the OK (D) button and "Time of day and date" will
appear on the display.
• Rotate the settings dial
heating circuit 1". Confirm the selection.
• Rotate the settings dial
"Period 1: Start" will appear on the display.
• Rotate the settings dial
month (e.g. 4 – April) and confirm the selection.
(E) to highlight "Holidays
one step to the RIGHT.
(E) and set the desired
25