Fitting The Name Plate - SOMFY V500 PRO io Bedienungsanleitung

EN
EN

3.2 Fitting the name plate

[1]. Press and turn the name tag holder 40° anti-clockwise using the
name tag holder lugs.
[2]. Lift the tag holder; the name tag holder is positioned between the
tag holder and the elastomer seal, in front of the retaining plate.
Note: the name tag holder has two cutaways that match lugs located
behind the name tag holder.
[3]. Write your name on the white tag with a permanent marker
(aligning the name on the tag cutaways), then put the tag and its
protector back into their housing by pressing the name tag holder
and rotating it 40° clockwise, until it click-locks.
6
Copyright © 2019 SOMFY ACTIVITES SA. All rights reserved.
V500 io