Package Content; Technical Data; Explanation Of Symbols - Scheppach mts 355s Originalanleitung

• Open the packaging and remove the de-
vice carefully.
• Remove the packaging material as well
as the packaging and transport bracing (if
available).
• Check that the delivery is complete.
• Check the device and accessory parts for
transport damage.
Dimensions W x B x H mm ................................................................................................................................................................. 540 x 320 x 630
Thread size of the spindle ....................................................................................................................................................................................... M10
Rated no-load speed 1/min ........................................................................................................................................................................1000 / 3500
Weight kg ................................................................................................................................................................................................................20,2
Details for cutting
Work piece min. mm ................................................................................................................................................................................. ø15 or 15x15
Work piece max. mm ........................................................................................................................................................................... ø 115 or 140x80
Cutting depth max. mm ............................................................................................................................................................................................ 140
Cutting width at 90° max. mm B x H ....................................................................................................................................................Ø 115 / 140 x 80
Cutting width at 45° max. mm B x H .................................................................................................................................................................. 95 x 80
Drive
Motor V~/Hz ................................................................................................................................................................................................ 230-240/50
Input power P1 / Watt ............................................................................................................................................................................................2300
Cutting discs type
Ø diameter mm
Ø size holes mm
width mm
max. rpm min
-1
Technical changes reserved!
■ NOISE/SOUND PARAMETERS
GB
Sound conduction level
L (A) according to EN ISO
W
3744
Noise pressure level L (A)
P
according to EN ISO 11201
Instability K
Vibration a
h
Instability K
Note: The indicated sound levels have been
determined according to a standardized
testing procedure and can be used to compare
different power tools with each other. Further-
more, these values are suitable to evaluate
the loads that sounds can cause for the user
in advance.
Always wear hearing
protection when
cutting
Wear a dust mask.
Always wear eye
protection when
cutting

Package content

• If possible, store the packaging until the
warranty period has expired.
m ATTENTION!
The device and packaging materials are
not toys! Children must not be allowed
to play with plastic bags, film and small
parts! There is a risk of swallowing and
metal cutting disc
355
25,4 H8
3,2
4400
108,0 dB(A)
95,0 dB(A)
3 dB(A)
4,2 m/s
2
1,5 m/s
2
Attention! Depending on how you will use
the power tool, the actual values may deviate
from the indicated values. Take measures to
protect yourself from noise pollution. In this
process it is important to take the complete
sequence of operation into account. This also
includes moments during which the power tool

Explanation of symbols

m

Technical Data

Protection class II
We have marked the
points in this manual that
concern your safety with
this sign.
Read through the manual
carefully before you work
on the power tool.
13
suffocation!
1. Metal cutting machine (1x)
2. Ring spanner (1x)
3. Operating manual (1x)
4. Cut-off wheel (1x)
5. Allen key (1x)
sawblade
355
25,4 H8
1,8
7000
operates without load and moments during
which it is turned off. Suitable measures
comprise amongst other things regular main-
tenance and service of the power tool and the
insertion tools, regular breaks and the approp-
riate planning of the sequences of operation.
Disposal notes
Only for EU - countries
see overleaf
GB