Basic Operation; Call Management - Kruger&Matz Traveler K15 Bedienungsanleitung

BASIC OPERATION

Turn on/ off: To turn on the device, slide power switch to BT icon. A voice
prompt will be issued, LED indicator flashes blue.
The headset will automatically turn off if pairing is not completed within about 3
minutes.
Slide power switch to battery icon to turn off the headset. A voice prompt will
be issued, LED indicator flashes red two times, then goes off.
Factory settings: During charging, press and hold the MFB for about 5
seconds until LED indicator flashes red 3 times.
EN

CALL MANAGEMENT

Answer call: When there is an incoming call, you will hear a voice prompt.
LED indicator flashes blue once every 8 seconds. Press the MFB to answer the
call.
18
Owner's manual Owner's manual
End call: Press the MFB.
Reject call: When there is an incoming call, press MFB button twice
Last number redialing: Press the MFB twice.
Call switching*: During call, press and hold the MFB for about 2 seconds to
transfer call to the phone (LED indicator flashes red twice every 10 seconds).
Press and hold the MFB again to switch it back to the headset (LED indicator
flashes blue twice every 10 seconds).
* The phone must support call switching function.
Voice dialing*: Press and hold the MFB for about 1 second.
* The phone must support voice dial function.
MUSIC PLAYBACK MANAGEMENT
Play/ pause: Press the MFB once to pause music. Press the MFB again to play
music.
Previous/ Next track: Press and hold the – button for about 2 seconds to go
EN
19