Returning The Device; Cleaning; Disposal; Accessories And Spare Parts - Stahl 9440/15 Betriebsanleitung

Cleaning

EN

11.4 Returning the Device

EN
• Only return or package the devices after consulting R. STAHL!
EN
Contact the responsible representative from R. STAHL.
EN
R. STAHL's customer service is available to handle returns if repair or service is required.
EN
EN
• Contact customer service personally.
EN
or
EN
EN
• Go to the r-stahl.com website.
• Under "Support" > "RMA" > select "RMA-REQUEST".
EN
• Fill out the form and send it.
EN
You will automatically receive an RMA form via email. Please print this file off.
EN
• Send the device along with the RMA form in the packaging to
EN
R. STAHL Schaltgeräte GmbH (refer to chapter 1.1 for the address).
EN
EN
12 Cleaning
EN • To avoid electrostatic charging, the devices located in potentially explosive areas may
only be cleaned using a damp cloth.
EN
• When cleaning with a damp cloth, use water or mild, non-abrasive, non-scratching
EN
cleaning agents.
EN
• Do not use aggressive detergents or solvents.
EN
EN
13

Disposal

EN
• Observe national and local regulations and statutory regulation regarding disposal.
• Separate materials when sending it for recycling.
EN
• Ensure environmentally friendly disposal of all components according to the statutory
EN
regulations.
EN
14

Accessories and Spare Parts

Malfunction or damage to the device due to the use of non-original components.
Non-compliance can result in material damage.
• Use only original accessories and spare parts from
R. STAHL Schaltgeräte GmbH.
26
CPU & power module
for Zone 2/Class I, Div. 2
Series 9440/15
For accessories and spare parts, see data sheet on our homepage
r-stahl.com.
NOTICE
162278 / 9440609310
2020-10-22·BA00·III·en·08