Beper P302VIS001 Bedienungsanleitung Seite 8

Turn the appliance on by pressing the ON/OFF button once, it will start operate at the
first suction power level.
By pressing the suction power selection button, it is possible to select second and
third level of power.
The power level is shown on the display.
For the best use of the item, it is advisable to move it around with circular movements
on the areas to be treated, paying attention not to stop in the same spot for too long.
It is better to move the appliance on the skin for about 5 minutes, avoiding focusing
too long and causing skin bruises.
Once the treatment is done, turn the appliance off by pressing the ON/OFF button.
Even if many signs of improvement can be seen after the treatment, such as reduces
blackheads, small pores and less evident skin clarity, it must be noted that some pro-
blems like excessive skin dryness and cracking may arise, especially for oily or mixed
skin. For this reason, it is advisable to use the item not more than twice a week, and
for only 5 minutes at a time, followed by abundant moisturizing.
Cleaning and maintenance
As this is an item designed for skin and face cleansing, it must be properly cleaned
after each use.
The item comes with a set of 5 replacing sponges, that can be used to replace the
sponge inside the item once this becomes full of waste.
Sometimes blackheads and grease can accumulate on the edge of the head used. In
this case, remove the head and simply clean it with hot water to remove any residue.
Ignoring correct maintenance of the item can compromise its operation, and
Ignorare la manutenzione compromette il funzionamento del dispositivo and promo-
tes the proliferation of bacteria on the skin.
Do not wash item under tap water and do not let any liquid penetrate inside the item.
Technical data
Lithium battery 400 mAh
Vacuum power: ≤20 kPa
For any improvement reasons, Beper reserves the right to modify or improve
the product without any prior notice.
8