Cleaning And Maintenance - Sanitas SBM 22 Gebrauchsanweisung

• If you press the function button +, the average
value of all the stored measured values in the user
memory will be displayed.
• If you press the function button + again, the average
value of the morning measurements for the last 7
days will be displayed (morning: 5 a.m. – 9 a.m.,
display ).
• If you press the function button + again, the aver-
age value of the evening measurements for the last
7 days will be displayed (evening: 6 p.m. – 8 p.m.,
display ).
• If you continue to press the function button +, the
most recent individual measured values are dis-
played in turn with the date and time.
• To switch off, press the START/STOP button
• If you forget to switch off the device, it will switch
itself off automatically after 30 seconds.
• If you want to delete the whole memory for a spe-
cific user, press the memory button M. Press and
hold down the memory button M and the setting
button SET simultaneously for 5 seconds.
.

8. Cleaning and maintenance

• Clean the device and cuff carefully using a slightly damp
cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cuff under
water, as this can cause liquid to enter and damage the
device and cuff.
• If you store the device and cuff, do not place heavy ob-
jects on the device and cuff. Remove the batteries. The
cuff line should not be bent sharply.
35