Sanitas SBM 22 Gebrauchsanweisung Seite 32

• Now insert the cuff line into the
connection for the cuff
connector.
Adopting the correct posture
• To carry out a blood pressure meas-
urement, make sure you are sitting
upright and comfortably. Lean back
and place your arm on a surface. Do
not cross your legs. Place your feet
next to each other flat on the floor.
• Always make sure that the cuff is at
heart level.
• To avoid distorting the measure-
ment, you should remain as still as
possible during the measurement
and not speak.
Performing the blood pressure measurement
• To start the blood pressure monitor, press
the Start/stop button
ments are briefly displayed.
• After the full-screen display, the respective alarm
symbols are displayed if alarm
ted.
• The blood pressure monitor will begin the measure-
ment automatically after approx. 3 seconds.
• The cuff inflates automatically while the actual
measuring process starts. As soon as a pulse is
found, the pulse symbol
• The remaining air is released quickly once the
measurement is complete.
• The systolic pressure, diastolic pressure
and pulse rate measurements are dis-
played.
32
. All display ele-
/ is activa-
is displayed.