Cleaning And Maintenance; Accessories And Replacement Parts; What If There Are Problems - Sanitas SBM 22 Gebrauchsanweisung

• If you want to delete the whole memory for a specific
user, press the memory button M. Press and hold
down the memory button M and the setting button
SET simultaneously for 5 seconds.

8. Cleaning and maintenance

• Clean the device and cuff carefully using a slightly damp
cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cuff under wa-
ter, as this can cause liquid to enter and damage the device
and cuff.
• If you store the device and cuff, do not place heavy objects
on the device and cuff. Remove the batteries. The cuff line
should not be bent sharply.

9. Accessories and replacement parts

Accessories and replacement parts are available from the cor-
responding service address (according to the service address
list). Please state the corresponding order number.
Designation
Standard cuff (22-36 cm)

10. What if there are problems?

Error Possible cause
mes-
sage
Unable to record
a pulse.
You moved or
spoke during the
measurement.
The cuff was not
attached cor-
rectly.
An error oc-
curred during
the measure-
ment.
29
Item number and/or
order number
163.912
Solution
Please wait one minute and
repeat the measurement.
Ensure that you do not speak
or move during the measure-
ment.
Please observe the information
in chapter "Attaching the cuff".
Please wait one minute and
repeat the measurement.
Ensure that you do not speak
or move during the measure-
ment.