Silk'n FaceTite H2120 Bedienungsanleitung Seite 17

8. Move the device in gentle massage-like motions on the
area you wish to treat. Progress slowly and carefully. Keep
moving the device ensuring that the 3 electrodes stay in
full contact with the skin as you treat the area.
With the device constantly in motion, treat each area for at
9.
least 15 minutes.
10. Increase the energy level gradually. Using the highest
energy level will get the best results, but it's important that
you set the energy level that is comfortable for the area you
are treating.
34º - 43º
1-2
You will feel the skin temperature rise as you increase the
Z
energy level. It usually takes about 1-2 minutes for the
device to reach the required temperature. During the
treatment your skin will get a little red. Don't worry; this
is normal.
11. Experiment by moving the device slowly across the area
you are treating. If the treated area is hot and you feel
uncomfortable, try moving the device a little faster.
Stop immediately if you feel any discomfort.
Z
43º
13-14
15
EN