Connection Overview; Pin Assignment - SICK microScan3 EFI-pro Montageanleitung

6

Connection overview

7

Pin assignment

7.1 Voltage supply (XD1)
8020210/16V7/2020-03-16 | SICK
Subject to change without notice
The safety laser scanner has 4 M5 threaded holes on the back. If you are able to drill
through the mounting surface from the rear, you can mount the safety laser scanner
directly using these threaded holes.
Use either the rear 1 or the side 2 M5 threaded holes for direct mounting.
b
Use all four rear or all four side M5 threaded holes for direct mounting, so that the
b
values given in the data sheet for vibration and shock resistance are achieved.
Maximum depth of thread engagement: 7.5 mm.
b
Tightening torque: 4.5 Nm to 5.0 Nm.
b
MICSX-BANNZZZZ1 (part number: 2086102)
XF1
XD1
XD1 Voltage supply
XF1, XF2 Ethernet for safety-related data communication, data output, configuration and
diagnostics
MICSX-BANNEZZZ1 (part number: 2081021)
XF1
XD1
XD1 Voltage supply
XF1 Ethernet for EtherCAT IN
XF2 Ethernet for EtherCAT OUT
XF3 Ethernet (not safety-related)
Male connector, M12, 4-pin, A-coded.
2
3
M O U N T I N G I N S T R U C T I O N S | microScan3 – EFI-pro, microScan3 – EtherCAT®, microScan3 – PROFINET (M12),
XF2
XF2 XF3
1
4
MOUNTING INSTRUCTIONS
microScan3 – EtherNet/IP™
13