Philips RQ1200 Serie Bedienungsanleitung Seite 9

activating the travel lock
1 Press the on/off button for 3 seconds to enter the travel lock mode.
RQ1280: The display starts to count down from 3. At 1, the appliance
,
beeps to indicate that it is locked.
, The lock symbol lights up on the display. After a few seconds it goes
out.
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
, The motor starts running to indicate that the travel lock has been
deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-in charger or Jet Clean System,
the travel lock is automatically deactivated.
power-saving mode (RQ1290 only)
The appliance is equipped with an automatic power-saving mode. When
the shaver enters the power-saving mode, the light in the on/off button
goes out to save energy.
- When the appliance is switched off but detects movement for 5
minutes (for instance when you are travelling with the shaver in your
suitcase), it automatically goes into power-saving mode. This mode
prevents the shaver from being switched on by accident.
, The lock symbol lashes on the display to indicate that the appliance
is in power-saving mode.
To deactivate the power-saving mode, simply press the on/off button.
-
Blocked shaving heads
Note: The displays of the various shaver types look different, but show the
same symbol.
- If the shaving heads are blocked, the shaving unit symbol, the tap
symbol and the exclamation mark lash. In this case, the motor cannot
MINUTES LEFT
run because the shaving heads are soiled or damaged.
When this happens, you have to clean the shaving unit or replace it.
-
- The shaving unit symbol, the tap symbol and the exclamation mark
continue to lash until you unblock the shaving heads.
charging
Charging takes approx. 1 hour.
RQ1290/RQ1280/RQ1260: A fully charged shaver has a shaving time of up
to 60 minutes or 20 days.
Note: RQ1290/RQ1280: When the battery is fully charged, the display shows
the actual remaining shaving minutes (see section 'Battery fully charged' in
chapter 'The display').
RQ1250: A fully charged shaver has a shaving time of up to 50 minutes or
16 days.
Charge the shaver before you use it for the irst time and when the display
indicates that the battery is almost empty (see section 'Battery low' in
chapter 'The display').
English
9