English; Intended Use; Installation And Operating Information; Safety Information - ABL Wallbox eMH1 Bedienungsanleitung/Sicherheitshinweise

Intended use

The Wallbox eMH1 is intended for charging your electric vehicle according to IEC 61851-1 Mode 3, and is
available in a range of versions with different charging capacities, and featuring either a fixed charging
cable with Type 2 charging connector or an integrated Type 2 charging socket for connecting a range of
separately available charging cables.

Installation and operating information

This document describes the basics of operating your Wallbox eMH1.
Before you can use your Wallbox eMH1, it must be installed and taken into operation by a qualified
specialist electrical contractor: The installation is described in a separate installation manual, which is
available in digital format (PDF) from the www.ablmobility.de website (see also "Additional technical
information" on page 26).
Operating manual (this document)
Additional technical information
ƒ Data sheets
ƒ Installation manual

Safety information

Danger
Dangerous electrical currents
The violation or non-observance of the safety information contained in this manual may lead to electric
shock, fire, severe injury and/or death.
ƒ Please read all safety information carefully.
ƒ Always follow all safety notices provided!
Please observe the following notes:
ƒ Please read this manual carefully.
ƒ Heed all warnings and follow all instructions.
ƒ Keep this manual in a safe place where it can be accessed at all times: The contents of this manual,
and the safety notices in particular, must be available to all users of the product.
ƒ Only use accessories intended and sold for the product by ABL.
ƒ Do not install this device in close vicinity to running water, water jets or areas subject to flooding.
ƒ The product must not be installed in explosive atmosphere areas (EX areas).
ƒ Electrical installation must be carried out with reference to local rules by a qualified electrician, who,
on the basis of their specialist training and experience, as well as their knowledge of the relevant
regulations, can assess and carry out the working steps described in this manual and recognise
potential hazards.
Wallbox eMH1 – Intended use
Specialist electrical
User
contractor
| 19