Spare Parts Order - Kettler TOUR 300 Montageanleitung

of this, children are allowed to use the equipment, ensure
that they are instructed in its proper use and supervised
accordingly.
• A slight production of noise at the bearing of the centrifugal
mass is due to the construction and has no negative effect
upon operation. Possibly occurring noise during reverse
pedalling result from engineering and are absolutely safe.
• To operate correctly, the pulse function requires a mini-
mum voltage of 2,7 volts (only for computers working with
batteries).
• Before beginning your first training session, familiarize
yourself thoroughly with all the functions and settings of
the unit.
• The equipment is dependent of revolutions per minute.
• The training device has a magnetic brake system.
• The Ergometer is intended for indoor use.

SPARE PARTS ORDER

• When ordering spare parts, always state the full article
number, spare-partnumber, the quantity required and the
S/N of the product (see handling).
• Example order: Art. no. xxxxx-yyy / spare-part no.
00000000 / 2 pieces / S/N ....................
• Damaged components may endanger your safety or redu-
ce the lifetime of the equipment. For this reason, worn or
damaged parts should be replaced immediately and the
equipment taken out of use until this has been done. Use
only original KETTLER spare parts.
• To ensure that the safety level is kept to the highest possi-
ble standard, determined by its construction, this product
should be serviced regulary (once a year) by specialist re-
tailers.
• Please ensure that liquids or perspiration never enter the
machine or the electronics.
Waste Disposal
KETTLER products are recyclable. At the end of its
useful life please dispose of this article correctly
and safely (local refuse sites).
EN
9