Brüel & Kjær Vibro ds822 Serie Betriebsanleitung Seite 38

2 mm displacement sensor system series ds822 ATEX
EN
Instruction
4.2 Assembling the driver (oscillator/demodulator)
4.2.1 Mounting on hat-rail
4.2.2 Screw mounting
4.3 Connect the components together
4.3.1 Connecting and disconnecting plug connections
4.3.2 Connection via extension cable
4.3.3 Direct connection
4.4 Setting up the measuring chain and the displacement sensor
4.4.1 Measurement set-up
4.5 Electrical connection
5 Explosion protection
5.1 Responsibility of the plant operator
6 Functional check
6.1 Quick check
6.2 Troubleshooting
7 Disassembly
7.1 Disconnecting the connecting plugs
7.2 Driver disassembly
7.2.1 Disassembling driver with assembly adapter on hat-rail
7.2.2 Disassembling driver with assembly adapter, screw-mounted
7.3 Replacing displacement sensor system components
8 Disposal
Page 2 of 29
| Contents
15
16
17
17
18
18
18
18
19
19
21
22
23
23
23
25
25
25
25
25
25
26
© Brüel & Kjær Vibro C105507.001 / V03

Technical alterations reserved!