Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3
Programming mode
Function
3.2.7
Direct dial-in
Calls to lines 1 and 2 are signalled on the handsets according to the
call assignment.
Direct dial-in
Calls on the lines are accepted by the tiptel easyBASE 28 plus, the
caller hears a signal tone and can trigger signalling on the relevant
handset after direct dialling the DTMF numbers 1...8. If no direct
dialling is detected within 10 seconds, the signalling is carried out
according to the call assignment. If the selected handset does not
answer, the signalling process is continued according to the call
assignment.
Factory setting: 0
3.2.8
Be aware that hunt group calls will not be signalled by a call waiting
tone.
Call-waiting
If an external or internal call is present, another external call for that
handset will not be signalled.
Call-waiting
If an external or internal call is present, another external call for that
handset will be signalled by a call waiting tone.
Factory setting: 1
Parameter codel
Direct dial-in
21
21
Call-waiting
22
22
13
Inputs
0 #
1 #
UK
0 #
1 #
Werbung
Kapitel
Inhaltsverzeichnis
