Other Messages; Check For Correct Functioning Of Balancing Accessories - Corghi ProLine 650 Betriebsanleitung

Call in the after-sales service.
E 27 Excessive braking time. If the
problem persists, call in the
technical support centre.
E 28 Encoder counting error. If the
error occurs frequently, call in
the technical support centre.
E 30
Wheel spin device failure.
Switch off the machine and call
in the after-sales service.
E 32 The wheel balancer has been
jolted during the reading phase.
Repeat the spin.
E F0 Error reading notch 0.

Other messages

CAL [GO] Calibration wheel spin.
GO Alu Wheel spin with Alu pro-
gramme selected.
GO d15 Wheel spin with Motorcycle
Dynamic programme selected.
GO A15 Wheel spin with Motorcycle
ALU programme selected.
St
Wheel spin with Static pro-
gramme selected.
Hid n
Setting of number of spokes in
"hidden weight" programme.
CCC CCC Unbalance values greater than
999 grams.
74
CHECK FOR
CORRECT
FUNCTIONING
OF bALANCING
ACCESSORIES
Checking balancing accessories allows
the operator to make sure that wear has
not altered the mechanical specifications
of flanges, cones, etc. beyond the speci-
fied limits.
A perfectly balanced wheel, which has
been disassembled and reassembled in
a different position, should not show an
unbalance value greater than 10 grams.
When a higher unbalance is found, check
all the accessories carefully and replace
the components that are not in perfect
condition (e.g. showing dents, abnormal
wear, flange unbalance, etc.).
Anyhow it is necessary to bear in mind that,
if the cone is used to centre the wheel,
satisfactory balancing results cannot be
achieved if the central hole of the wheel is
out-of-round or incorrectly centred; better
results can be achieved by centring the
wheel using the securing holes.
bear in mind that any re-centring error
made when the wheel is mounted on the
car can be removed only removed with an
"on-the-vehicle balancing" of the wheel,
using an on-the-vehicle wheel balancer
to complement the work of the wheel
balancer.
User manual ProLine 650