Error Messages - Corghi EM 9280 Betriebsanleitung

recommended that only technical support technicians consult them.
Select the service programmes icon to display this programme
This program is used to optimise the synchronisation of the LCD motor approved by the
manufacturer. Proceed as follows to perform this synchronisation:
- select the MONITOR AUTO SETTING icon;
- once selected, the following screen will appear on the monitor;
- to perform the synchronisation, press the corresponding key directly on the LCD moni-
tor (read the instructions in the monitor user manual).
Push the exit key
IMPORTANT:
repeat the operation if necessary if synchronisation was not successful.
The machine can recognise a certain number of malfunction conditions and signals them
by displaying the relevant messages.
A 3 Wheel not suitable for performing the sensitivity calibration, use a wheel of
average dimensions (typically 5.5"X14") or larger, but NOT exceeding a weight
of 40kg.
Operator's manual EM 9280 - EM 9280 C CompactLine
Monitor Auto Setting
to exit the program without performing the synchronisation.

ERROR MESSAGES

– A – Notice Messages
.
UK
119