Operation
∙
Never use the device without the basket. Place the food into the basket and
not into the pot.
∙ Clip the basket into the pot and slide both parte into the device. To remove the bas-
ket pull out both parte and place on a heat resistant surface. By pressing the button
on the handle, you can separate the basket from the pot.
∙ Plug in the device, the red light shines. Chose the temperature (80 – 200°C).
∙ Set the time (1 – 30 min), the green light shines and clocks.
∙ The device heats if the green light shines, the temperature is reached if the green
light is off.
∙ Pre-heat the device for 2 minutes, fill the basket up with food and insert it to the
device.
∙
The outer pot and the basket are hot!
∙ Fill the basket up to ¾ in order to avoid any burns on the
food and leave space to turn the food.
∙ By pulling out the pot from the device to control the degree
of doneness, the heating is interrupted, time keeps running.
∙ After the time run out, take out the pot and place it on a
heat resisting surface.
1) Outer pot
2) Basket
3) Basket locking
4) Basket handle
5) Timer
6) Thermostat
7) Temperature control light
8) Power control light
9) Air outlet
10 – 12) Air intake
13