Melitta Caffeo Solo Bedienungsanleitung Seite 18

• Insert the water reservoir into the
appliance.
• Place a vessel under outlet 2.
• Press the ON/OFF button
the appliance on or off. The appliance
will perform an automatic rinse if
necessary.
Preparation
• Fill the water reservoir with fresh water
every day. The water reservoir must
always be filled with enough water for
the operation of the appliance.
• Fill the bean container preferably with
espresso beans or bean mixtures for
fully automatic coffee machines.
Do not use any glazed, caramelised or
otherwise sugar-coated coffee beans.
Setting the dispensed quantity and
strength
• Turn the coffee quantity regulator 3 to
infinitely adjust the dispensed quantity.
Regulator all the way to the left = 30 ml
per cup
Regulator all the way to the right = 220
ml per cup
• Press the
strength is adjusted. The strength is
displayed by the beans on display 9
(from
18
Downloaded from www.Manualslib.com
to switch
button until the desired
= mild to = strong).
manuals search engine
Dispensing coffee or espresso
One or two cups can be dispensed
simultaneously.
• Switch on the appliance.
• Place one or two cups under the outlet.
• Preparing one cup: Press the button for
single-cup dispensing or
• Preparing two cups: Press the button for
two-cup dispensing.
• Press the corresponding button again to
cancel the coffee dispensing.
Water hardness and filter
It is important to properly set the water
hardness so that the appliance displays
the need to be descaled in due time. From
the factory, it is set at water hardness 4.
After inserting a Melitta
filter, it is automatically set at hardness
level 1.
® ®
Melitta Claris water filter
The Melitta Claris water filter removes
® ®
lime and other harmful substances from
the water. The water filter should be
changed every 2 months, however, at the
latest when appears on the display.
The water filter is available in specialised
shops.
Claris water
® ®