Storage; General Aspects - Beem Ecco De Luxe 4 in 1 Bedienungsanleitung

Ecco De Luxe 4 in 1
Clean the calcium filter under run-
‹
ning water and insert it into the holder
again.
Coffee machine
In order to increase the service life of the
appliance and not impair the quality of the
coffee, it must be descaled at regular in-
tervals. The descaling interval depends on
the water hardness (we recommend pre-
cautionary descaling every three months).
To descale the coffee machine proceed as
follows:
Fill the water tank (16) with a mixture
‹
of fresh water and citric acid or vin-
egar essence (approx. 5% acid) up to
the mark 8 .
Swing in the filter compartment (22)
‹
with filter holder (23) and permanent
filter (24) without coffee powder.
Put the thermos jug (19) with lid (20)
‹
onto the resting plate (18).
Switch on the coffee machine.
‹
Wait until approximately one cup has
‹
run through and then switch off the
coffee machine.
Allow the descaling solution to soak
‹
for approximately 10 minutes and
switch on the coffee machine again.
The descaling procedure is com-
‹
plete when all of the solution has run
through.
After descaling, repeat the procedure
‹
twice with fresh water to rinse the cof-
fee machine.
Rinse the thermos jug (19), lid (20),
‹
filter holder (23) and permanent filter
(24) thoroughly under running water.
Push the drip-stop (21) several times
‹
while rinsing.
NOTE
► If you use a commercially available
descaling agent, observe the manu-
facturer's instructions for use.
28
Downloaded from www.Manualslib.com manuals search engine
NOTE
► If the appliance is severely scaled,
it may be necessary to repeat the
descaling process.
Care of stainless steel parts
We recommend using INOX-METAL-
POLISH from BEEM for regular mainte-
nance and the removal of difficult stains
from stainless steel surfaces. The polish
restores appliances to their original shine.
INOX-METAL-POLISH is available in
tubes and is suitable for pots as well as
for other objects made of stainless steel,
chromium, brass, copper, aluminium, sil-
ver and also hard plastics. INOX-METAL-
POLISH is used in factories for polishing
stainless steel.
You can obtain INOX-METAL-POLISH
from your retailer or by phoning us or visit-
ing our website at www.beem.de .

Storage

If you do not intend to use the appliance
for a longer period of time, empty and
clean it as described in the section Clean-
ing and maintenance (page 27). Store
the appliance and all accessory parts at a
dry, clean and frost-free location which is
protected against direct sunlight.

General aspects

Guarantee
In addition to the statutory warranty obliga-
tion, BEEM also grants an extended man-
ufacturer's guarantee for some products.
Provided this is granted, the correspond-
ing details for each product can be found
either on the product­specific packaging,
advertising material or on the BEEM web-
site.
BEEM - Elements of Lifestyle
EN