Tractel tirak L 500 P Serie Original-Montage- Und Betriebsanleitung Seite 52

Installation and operating manual
Renewing rope tips
Send the wire rope to Tractel or a lifting equipment service company authorized by Tractel and have the tip replaced.
8.4.4 Power supply cable / connection cable from hoist to control box
The cables must be replaced by an electrician if any damage has been caused to the insulation or the cable connectors.
8.4.5 Hoist
Danger of falling and danger from falling objects due to slippery or damaged ropes or brake failure and malfunctions!
Might result in severe injuries or even death!
– Do not lubricate the wire rope using a lubricant that contains disulfide (e.g. Molycote
– Use multi-purpose grease or oil.
– Cleaning the wire rope or products in contact with the wire rope using high pressure cleaners is prohibited! Moisture will
result in malfunctions and damage to the motor, brake and the electrical equipment.
– Dirt on the wire rope will result in premature wear or the corrosion of the wire rope, suspension rig and hoist.
See the separate maintenance instructions provided for trained personnel.
Motor, gearbox and brake
The motor, gearbox and brake are maintenance-free until the number of permitted running hours are realized (general overhaul).
– Clean the outside if heavily soiled.
– Keep the brake free of oil and grease.
Hand crank axle
Damage to the axle!
– The axle must always be greased.
– Clean and grease the hand crank axle.
8.4.6 Traction sheave external teeth (model series X 2050)
Specification of grease, see § 4.6.
Illustration 28
– Apply the grease gun to the lubrication nipple (1).
EN-52
DANGER!
ATTENTION!
).
®
G1035.4 – 01/2019