Charging Modes - VOLTCRAFT B6 MINI Bedienungsanleitung

14. CHARGING MODES

Please note that there are different charging modes for different types of batteries.
Battery type
LiPo
LiIon
LiFe
NiMH
NiCd
55
Charging mode Description
CHARGE For charging LiPo/LiFe/LiIon battery
DISCHARGE For discharging LiPo/LiFe/LiIon battery
STORAGE For charging or discharging lithium battery which will
not be used for long time.
FAST CHG For charging at a slightly smaller capacity than normal
charging. The process time will be reduced.
BAL CHARGE For balancing the voltage of lithium-polymer battery
cells while charging.
Note: We recommend charging lithium batteries
with a balance wire in the balance mode only.
CHARGE For charging NiMH/NiCd battery using the charge
current set by the user.
AUTO CHG In this program the charger detects the condition of
the battery connected to the output and automatically
charges the battery.
Note: you should set up the upper limit of the
charge current to avoid damage by excessive
feeding current. Some batteries of low resistance
and capacity can lead to higher current.
DISCHARGE For discharging NiMH/NiCd battery
RE-PEAK For peak charging the battery once, twice or three
times in a row automatically. This is good for confirming
that the battery is fully charged, and for checking how
well the battery receives fast charges.
CYCLE For 1 to 5 continuous cycles of charge/discharge or
discharge/charge. It is good for battery refreshing and
balancing to stimulate the battery's activity.