VOLTCRAFT B6 MINI Bedienungsanleitung Seite 46

Standard Battery Parameters
LiPo
Nominal 3.7 V/cell
voltage
Max 4.2 V/cell
charge
voltage
Storage 3.8 V/cell
voltage
Allowable 1 C (or
fast charge lower)
Min 3.0 - 3.3
discharge V/cell
voltage
Be very careful to choose the correct voltage for different types of battery otherwise you may
cause damage to the batteries. Incorrect settings could cause the cells to fire or explode.
• Never attempt to charge or discharge the following types of batteries.
A battery pack which consists of different types of cells (including different
manufacturers)
A battery that is already fully charged or just slightly discharged.
Non-rechargeable batteries (Explosion hazard).
Batteries that require a different charge technique from NiCd, NiMH, LiPo or Gel
cell (Pb, Lead acid).
A faulty or damaged battery.
A battery fitted with an integral charge circuit or a protection circuit.
Batteries installed in a device or which are electrically linked to other
components.
Batteries that are not expressly stated by the manufacturer to be suitable for the
currents the charger delivers during the charge process.
LiIon LiFe
3.6 V/cell 3.3 V/cell
4.1 V/cell 3.6 V/cell
3.7 V/cell 3.3 V/cell
1 C 4 C (or
lower)
2.9 - 3.2 2.6 - 2.9
V/cell V/cell
NiCd NiMH
1.2 V/cell 1.2 V/cell
1.5 V/cell 1.5 V/cell
n/a n/a
1 C - 2 C 1 C - 2 C
0.1 - 1.1 0.1 - 1.1
V/cell V/cell
Pb
2.0 V/cell
2.46 V/
cell
n/a
0.4 C (or
lower)
1.8 V/cell
46