Fig. 67: Connection Of Programming Terminal Via X3C - Bosch Rexroth PSI 6 Serie Betriebsanleitung

364 / 460 Bosch Rexroth AG
Assembly
X3C (V24/RS232 interface, miniature DIN)
X3U (USB interface)
Only in connection with PSI 6xCx.xxx!
Connection: to X3C; miniature DIN, 8-pole, male connector
Cable length: max. 20 m (with recommended cable type)
Cable type: shielded, core area min. 0.2 mm
capacitance max. 2.5 nF
(e.g.: 3 x 2 x 0.2 mm
Transmission rate: 19200 bit/sec
Parameters: 8E1 (8 data bits, even parity, 1 stop bit)
X3C
1
2
3
TX
4
GND
5
RX
6
7
8
Female connector
Ensure screen continuity through large-area connection to metal
housing of the plug connection.

Fig. 67: Connection of programming terminal via X3C

For suitable connecting cables, refer to Section 13.1 page 413.
Only in connection with PSI 6xCx.xxx!
Connection:
Cable length:
For suitable connecting cables, refer to Section 13.1 on page 413.
When the USB connector has been plugged in, the X3C interface is
automatically deactivated!
PSI 6xxx |
2
LifYCY, Metrofunk)
PC (COM1 or COM2)
2
RX
3
TX
4
GND
5
Male connector
to X3U; USB type B connector
max. 3 m
1070080028 / 08
2
,