Troubleshooting Table - hanseatic 65C90C7-E11B000 Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appliance yourself. You can put
your own and future users' lives in danger. Only authorised specialists are allowed to
carry out this repair work.
Problem
The oven and cooking
zones are not working
and nothing is shown on
the display.
Fissures or cracks in the
hob.
The heat symbol will dis-
appear.
The cooking compart-
ment light is defective.
The external cooling fan
is not working; no air re-
leased from the air locks
and Cover is very hot.
External cooling fan
keeps running.
Possible solutions/tips
The power supply has been interrupted. Check the fuses for the
cooker set on the fuse box. In case of doubt, please contact our
Service Centre (see page EN-34).
Switch off all cooking zones immediately and stop using them. Con-
tact our Service team (see page EN-34).
The set oven temperature has been reached. The heat symbol will
automatically re-appear as soon as the oven re-heats.
Replace the defective bulb for the cooking compartment light (siee
„Replacing oven lightbulbs" on page EN-24). Notice: Defective bulbs
do not fall under our warranty.
Switch on just the cooking compartment lighting – if there is no fan
noise and no air is being released, the fan is defective.
CAUTION!
Risk of burns!
In such an event, immediately open the oven door, switch
■
off the appliance, and stop using the cooker! Contact our
Service Centre (see page EN-34).
No error. The external cooling will run for a while and then shut off
automatically.
Troubleshooting table
Page EN-33