Chapter 2 - Description And Operation; Mains Supply; Features - Desoutter EAP-Tflex Bedienerhandbuch

Inhaltsverzeichnis

Verfügbare Sprachen

Part no

6159932890

Issue no

Language English

Date

01/2010

166

Page

6 /

The EAP-TFlex tool is an electric fastening tool directly supplied by mains. It is fitted with a torque transducer for high-precision

torque control. The main regulation parameter is the torque, which can be changed using the display and the 3 programming keys.

Tool type

A=angle-head

Motor type

Maximum torque in Nm

(30 Nm or 65 Nm)

There are several options:

EAP2-65-TF*

EAP2-30-TF*

TF for TFlex; * = 1 for 115 VAC, 2 for 230 VAC

1 - MAINS SUPPLY

There are 2 types of tools:

•

one tool which works with 230 VAC mains voltage, ± 8%, 50/60Hz

•

one tool which works with 115 VAC mains voltage, ± 8%, 50/60Hz

Although the peak power can reach 2 kW during the final speed phase, it is recommended to adjust the power circuits according

to the maximum average power.

The average power input depends on the tool type, the assembly type and the tightening rate. However, for heat dissipation

reasons, the maximum average power should not exceed 0.3 kW.

2 - FEATURES

Protection level

EN 60745

Noise level

EN 60745

Vibration level

Declaration of noise and vibration emission

All values are current as of the date of this publication. For the latest information please visit cp.com.

These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for

comparison with the declared values of other tools tested in accordance with the same standards. These declared values are not

adequate for use in risk assessments and values measured in individual work places may be higher. The actual exposure values

and risk of harm experienced by an individual user are unique and depend upon the way the user works, the workpiece and the

workstation design, as well upon the exposure time and the physical condition of the user.

We, Chicago Pneumatic, cannot be held liable for the consequences of using the declared values, instead of values reflecting the

actual exposure, in an individual risk assessment in a work place situation over which we have no control.

This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing hand-arm

vibration can be found at http://www.humanvibration.com/EU/VIBGUIDE.htm