Jura IMPRESSA XJ5 Professional Bedienungsanleitung Seite 28

Permanent settings in programming mode
Language
Disable
Downloaded from www.Manualslib.com
In this programme item you can set the language used by your
IMPRESSA.
Example: Proceed as follows to change the language from
ENGLISH
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until the programme item
k T Press the Rotary Switch.
g T Turn the Rotary Switch until
k T Press the Rotary Switch.
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming mode.
In the programme item
U
U
U
Example: Proceed as follows to disable one-off settings before and
during preparation.
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until the programme item
manuals search engine
to .
DEUTSCH
is displayed.
READY
RINSE
is displayed.
LANGUAGE
ENGLISH
appears briefly on the display.
OK
SPRACHE
BEREIT
you can make the following settings.
LOCK
:
BUTTONS
U
Each product can be disabled individually. It cannot then be
prepared. is briefly displayed if the button for a
LOCKED
disabled product is pressed.
:
PRE-SELECT
U
One-off settings cannot be made before and during prepa-
ration. The product is prepared according to the settings in
programming mode.
:
MAINTAIN
U
The maintenance programmes are disabled and cannot be
started.
is displayed.
READY
RINSE
displayed.
appears.
RINSE
is displayed.
DEUTSCH
is displayed.
EXIT
appears.
RINSE
LOCK
is