Permanent settings in programming mode
Rinses
Restore factory settings
Downloaded from
www.Manualslib.com
In the programme item
settings:
U
U
Example: Proceed as follows to specify that the switch-on rinse
should be started manually.
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until the programme item
k T Press the Rotary Switch.
g T Turn the Rotary Switch until
k T Press the Rotary Switch.
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming mode.
In the programme item
their factory settings:
U
U
U
Example: Proceed as follows to reset the values for espresso to the
factory settings.
Precondition:
manuals search engine
RINSING
MANUAL
U
The switch-on rinse must be started manually.
AUTOMATIC
U
The switch-on rinse is started automatically.
is displayed.
READY
RINSE
is displayed.
RINSING
AUTOMATIC
appears briefly on the display.
OK
RINSING
READY
RESET
PRODUCT
U
The settings (e.g. amount of water and temperature) for any
product can be reset individually to the factory settings.
ALL PROD.
U
The settings (e.g. amount of water and temperature) for all
products are reset to the factory settings.
RESET.ALL
U
All user settings (apart from the 'filter' and 'water hardness')
are reset to factory settings. Your IMPRESSA then switches
off.
is displayed.
READY
you can make the following
appears.
RINSE
is displayed.
MANUAL
is displayed.
EXIT
you can reset various settings to