Water Supply - Zanussi ZWT 3207 Benutzerinformation

We recommend that you keep the
packaging and the transit bolts
for any transport of the appliance.
Adjust the appliance correctly to prevent vibration,
noise and movement of the appliance when it
operates.
WARNING! Do not put cardboard,
wood or equivalent materials
below the appliance feet to adjust
the level.

WATER SUPPLY

3/4"
3/4"
O O
90 90
Accessories delivered with the appliance may vary
depending on the model.
Make sure there is no damage to
hoses and there are no leaks from the
couplings. Do not use an extension
hose if the inlet hose is too short.
Contact the service centre for a
replacement inlet hose.
0.3-10 bar
FI
1/2"
SE
3/4"
NO
DK
DRAINAGE
min.600 mm
max.1000 mm
The drain hose should stay at a height of no less
than 600 mm and not more than 1000 mm.
You can extend the drain hose to maximum 4000
mm. Contact the authorised service centre for the
other drain hose and the extension.
ELECTRICAL CONNECTION
At the end of installation you can connect the mains
plug to the mains socket.
The rating plate and the 'Technical Data' chapter
indicate the necessary electrical ratings. Make sure
that they are compatible with the mains power
supply.
Check that your domestic electrical installation can
take the maximum load required, also taking into
account any other appliances in use.
Connect the appliance to an earthed socket.
The power supply cable must be easily accessible
after installing the appliance.
For any electrical work required to install this
appliance, contact our Authorised Service Centre.
The manufacturer does not accept any
responsibility for damage or injury through failure to
comply with the above safety precaution.
7