Shredding Attachment - Bosch MFW39 Gebrauchsanleitung

en

Shredding attachment

Note (MFW3X...):
After switching on, the appliance runs at the
ideal speed 2 (fast).
6. Use the pusher to slide the food down
the feed chute, applying light pressure.
7. Once you have finished, switch off the
appliance and pull out the mains plug.
■ Remove the filling tray and pusher.
8. Hold down the release button and turn the
attachment clockwise until it disengages.
■ Remove the attachment, take it apart
and clean all parts. X "Care and daily
cleaning" see page 27
Shredding attachment
For shredding, grating and slicing items
such as cheese, fruit, vegetables, nuts,
almonds, dried bread rolls and other hard
foodstuffs. Select the appropriate insert
depending on the type and consistency of
the food to be processed. X "Tips" see
page 28
Preparation
W Risk of injury!
Do not reach into the sharp blades and
edges of the shredding, grating and slicing
inserts.
X Fig. G
1. Open the cap. Fit the required insert into
the housing.
2. Close the cap until you hear it click into
position.
The shredding attachment is now prepared.
Use
W Risk of injury!
– Do not reach into the feed chute with
your hands.
– Only use the pusher when adding more
food.
Caution!
– The pusher can only be inserted in one
direction.
– Remove hard shells (e.g. on nuts).
– Do not apply great force with the pusher.
24
Caution! (MFW3X...)
– Always use the shredding and cutting
inserts at speed 1 (slow).
– Use the grating insert at speed 2 (fast).
X "Speed setting" see page 22
X Fig. H
1. Fit the prepared attachment onto the
drive of the base unit, holding it at an
angle.
2. Turn the attachment anticlockwise until
you hear it click into position.
3. Fit the filling tray and insert the pusher
in the feed chute.
4. Prepare your food. Chop up large parts
beforehand so they fit into the feed
chute without having to press them in.
5. Place a suitable container under the
attachment. Add the prepared food to
the filling tray.
6. Connect the mains plug. Switch on the
appliance.
Caution! (MFW3X...)
After switching on, the appliance runs at
speed 2 (fast). To use the shredding and
cutting inserts, you must press button
+ once to switch to speed 1 (slow).
X "Speed setting" see page 22
7. Use the pusher to slide the food down
the feed chute, applying light pressure.
The food is now cut up or shredded.
8. Once you have finished, switch off the
appliance and pull out the mains plug.
9. Remove the filling tray and pusher.
10. Hold down the release button and
turn the attachment clockwise until it
disengages.
11. Remove the attachment, take it apart
and clean all parts. X "Care and daily
cleaning" see page 27