Auriol HG05686A-DCF Bedienungs- Und Sicherheitshinweise Seite 51

Mounting the temperature station and / or the outdoor
sensor on a wall:
Note: You will require an electric drill and a crosshead screwdriver
for this step.
CAUTION! DANGER TO LIFE, RISK OF INJURY AND
MATERIAL DAMAGE! Read the operating and safety instructions
for your drill carefully.
not hit electricity, gas or water lines when you drill into the wall.
If necessary, check with a pipe and cable detector before drilling.
Mark the position of the hole (ø approx. 6 mm) on the wall.
Drill the hole with an electric drill.
Insert the dowel
Using a crosshead screwdriver, screw the screw
the dowel.
Hang the temperature station or outdoor sensor by placing the
hanging slot
DANGER TO LIFE! Take care that you do
, into the drilled hole.
35 43
, to the according screw.
34 42
, into
36 44
GB/IE 51