MEISTER CRAFT MOF 1300 Originalbetriebsanleitung Seite 62

5458060-Oberfraese-man 24.01.14 11:48 Seite 62
the risk of starting the power tool
accidentally.
d Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
e Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
5 Service
a Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
b To avoid hazards, damaged power
leads must be replaced by the
manufacturer or his customer service
representative.
62
6 Additional safety notes
• Only hold the power tool by the
insulated handles since the mill is
capable of cutting its own power
cable. Contact with a power-carrying
cable may also put metal parts of the
unit under power and cause an
electric shock.
• Affix and secure the work piece to a
stable surface using clamps or
another suitable method. If you hold
the work piece with your hand only or
up against your body, it will be unstable
which may lead to a loss of control.
• Do not allow other people, particularly
children to touch the power tool or
the cable.
• Always use the correct power tool. Do
not use low-performance machinery
for heavy-duty tasks.
• Do not use the power tool for a
purpose it is not designed for.
• When working outdoors, we
recommend you wear sturdy
shoes.
• Secure the work piece. Use clamping
mechanisms or a vice to securely
fasten the work piece. This is safer
than holding it in your hands.
• Follow the instructions regarding
oiling and changing tools.
• Regularly check the power cable of
the power tool and, if it is damaged,
have it replaced by a recognised
specialist.
• Check the extension cables regularly
and replace if they are damaged.