Battery Type; Package Contents - DeWalt DCF680 Originalanweisungen

battery performance and life, store battery packs at room
temperature when not in use.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool, dry place out of the charger for
optimal results.
nOtE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be recharged
before use.
Battery Cap (Fig. B)
A protective battery cap is supplied to cover the contacts of
a detached battery pack. Without the protective cap in place,
loose metal objects could short circuit the contacts, causing a
fire hazard and damaging the battery pack.
1. Take off the protective battery cap before placing the
battery pack in the charger or tool.
2. Place the protective cap over the contacts immediately after
removing the battery pack from the charger or tool.

WARNING: Make sure the protective battery cap is in
place before storing or carrying a detached battery pack.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:
Read instruction manual before use.
See Technical Data for charging time.
100%
Battery charging.
100%
Battery charged.
Battery defective.
Hot/cold pack delay.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other
e
than the designated D
D WALT charger may make them burst or lead to
e
other dangerous situations.
Do not incinerate the battery pack.

Battery Type

The DCF680 and DCF682 operate on a 7.2 volt battery pack.
These battery packs may be used: DCB080. Refer to Technical
Data for more information.

Package Contents

The package contains:
1 Cordless Screwdriver
1 Charger
1 Battery pack (G1 model)
2 Battery packs (G2 model)
1 Kitbag (G1 model)
1 Kitbox (G2 model)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Date Code Position
The date code, which also includes the year of manufacture, is
printed into the housing surface that forms the mounting joint
between tool and battery.
Example:
2017 XX XX
Year of Manufacture
EngLIsh
WALT batteries with a
e
27