Battery Pack; Package Contents - DeWalt DC901 Originalanweisungen

the buyer's responsibility to ensure that its activities
comply with the applicable regulations.

Battery Pack

BATTERY TYPE
The DC901 operates on 36 volt Li-Ion battery packs.
Storage Recommendations
1. The best storage place is one that is cool and
dry away from direct sunlight and excess heat or
cold. For optimum battery performance and life,
store battery packs at room temperature when
not in use.
NOTE: Li-Ion battery packs should be fully
charged when stored.
2. For long storage, it is recommended to store a
fully charged battery pack in a cool, dry place out
of the charger for optimal results.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the
labels on the charger and the battery pack show the
following pictographs:
Read instruction manual before use.
Do not expose to water.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not use damaged chargers.
Charge only between 4 °C and 40 °C.
Have defective cords replaced immediately.
Charger problem.
Battery problem.
Discard the battery pack with due care for
the environment.
Do not incinerate the battery pack.
Charge only with dedicated D
chargers.
See Technical Data for charging time.

Package Contents

The package contains:
1 Cordless hammerdrill/driver
1 Side handle
1 Battery pack (D1, M1)
2 Battery packs (D2, M2)
1 Charger
1 Kitbox
1 Instruction manual
1 Exploded drawing
NOTE: Battery packs and chargers are not included
with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fi g. A, B)
WARNING: Never modify the power tool
or any part of it. Damage or personal
injury could result.
1 Variable speed switch
2 Forward/reverse slider
3 Keyless chuck
4 Torque adjustment collar
5 Mode selector
6 Three-gear selector
7 Bit holder
8 Grip
9 Side handle
10 Battery pack
11 Release button (fig. B)
12 Charger (fig. B)
13 Charging indicators (red) (fig. B)
INTENDED USE
Your hammerdrill/driver has been designed for
professional screwdriving, drilling, and percussion
drilling applications.
ENGLISH
WALT
E
37